HOW TO INSTALL PRETTYPEGS FURNITURE LEGS
M8-BOLTÂ (always included)
M8 bolt (8mm width) is the most common style of fitting system and fits most popular furniture from IKEA, for ex -
SOFAS: Karlstad / Klippan / Karlsfors / Klobo /  Ektorp / Söderhamn / Solsta / Nikkala / Ljungvik  / Sandby / Oleby / Tidafors / Vaxholm / Härnösand / Skogaby / Stockholm (up to 3 seat) / Säter / YstadÂ
CHAIRS:Â Mellby chair / Tullsta chair / Solsta-Olarp chairÂ
BEDS: Konsmo bed frame.
OTHER: Bestå serie
M8 bolt also fit a large number of sofas, beds and other furniture models from other manufacturers.
It screws directly into your furniture (8mm pre-drilled) holes and you can always ask your furniture reseller if a M8 bolt fits your furniture. If your furniture does not use M8 bolt, see our Universal fitting plate below.
Installing Prettypegs with a M8-bolt is real easy! 1 – Screw down the bolt until it sticks up app 30 mm. 2 – Put on the metal brick. 3- Screw the leg onto your furniture by hand!
As with all furniture legs, remember to put felt pads on to protect your floor (not included), also be careful when turning your furniture over so you won’t damage the legs or the floor!
UNIVERSAL FITTING PLATE
For furniture that do not take M8 bolts, choose our Universal Fitting Plate. This plate fits most corner frames and flat surfaces.
Check underneath your furniture to see if it is possible to mount screws (length 25mm). They screw directly into the corners’ of the frame, so make sure there is enough space and depth and that the material is flat and suitable to take screws. Installing requires a screwdriver (screws are included).
1 - Screw the plate onto the corners of the frame. 2 - Screw the bolt down to the bottom of your Prettypegs using a Hex key (Included). 3 - Screw the Prettypegs onto the Universal plate by hand. See below.Â
As with all furniture legs, remember to put felt pads on to protect your floor (not included), also be careful when turning your furniture over so you won’t damage the legs or the floor!
FORK PLATE
This fitting plate is especially suited for the majority of IKEA’s Sultan bed serie:Â
Silsand / Salhus / Skaun / Slåstad / Sagvåg / Stamnes / Singås / Songli / Skaland.
This plate could also fit other manufacturers’ beds.
Installing Prettypegs onto your bed is real easy. 1 - Fasten the bolt into your Prettypegs using a Hex key (Included). 2 – Place the fork plate over the bolt and fasten it with the screw-nut. 3 - Then fasten your Prettypegs with the hex bolt into the frame of the Sultan bed (use a wrench). All bolts are included.Â
Make sure the bolts are screwed in tightly. Re-screw them after a week or two to make sure they are tightly fasten.
As with all furniture legs, remember to put felt pads on to protect your floor (not included), also be careful when turning your furniture over so you won’t damage the legs or the floor!
MEASURENMENTS
For most Prettypegs models, the height measurenment varies depending on if you choose a sofa leg or a bed leg. To see the hight measurenment for your Prettypegs, check the centre screen below the chosen Prettypegs model.
Also remember to make sure your furniture does not require different measured front and back legs since all four Prettypegs come with the same height.
